NCL BARE BONES® LOW ODOR Low Odor All-Purpose Speed Stripper, 5 Gallon Pail
NCL BARE BONES® LOW ODOR Low Odor All-Purpose Speed Stripper, 5 Gallon Pail
Description
Dilute BARE BONES® LOW ODOR following dilution recommendations below. Dilute using cold or mildly warm water only.
Light/Normal Buildup: 8 oz per gallon of water (1:16)
Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)
Mop/Wet Vacuum Stripping System: Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.
Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Specifications
National Chemical Laboratories
Floor/Carpet Cleaners & Protectors
Other products
NCL BARE BONES® LOW ODOR Low Odor All-Purpose Speed Stripper, 5 Gallon Pail
NCL BARE BONES® LOW ODOR Low Odor All-Purpose Speed Stripper, 5 Gallon Pail
Description
Dilute BARE BONES® LOW ODOR following dilution recommendations below. Dilute using cold or mildly warm water only.
Light/Normal Buildup: 8 oz per gallon of water (1:16)
Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)
Mop/Wet Vacuum Stripping System: Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.
Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Specifications
National Chemical Laboratories
Floor/Carpet Cleaners & Protectors
Other products